How to choose the motor of enamel reactor

Every enamel reactor will use the motor, so how to choose the right motor for us? Generally speaking, the motor of enamel reactor can be selected from the following points to note.

1, whether the viscosity of the material is high: according to the maximum viscosity of the material (the reaction is dynamic, the viscosity will change), the size and area of the blades of the stirrer, as well as the speed of the stirring to determine the torque, so as to determine the rotational speed of the motor, in order to prevent overloading. The torque of the selected motor should be more than 1.5 of the torque required for the stirring reaction to be safe and to ensure that the stirring is always carried out at the required speed. Motor selection should be concerned with torque, not power. The torque of motors with the same power at the same speed is not necessarily the same, especially for AC and DC motors, which are very different. In terms of a single motor, at different speeds, the maximum torque is not the same.

2, speed requirements: according to the economic budget conditions. For example, if the speed requirement is not very high, you can use a geared motor; and choose a more powerful motor and then use a frequency converter can adjust the speed down. This can save costs.

3, the size of the motor power

4, whether the power supply is limited

5, whether the motor is explosion-proof: materials and products are flammable and explosive. Materials and products if flammable and explosive, should choose explosion-proof motor.

6, whether you need a frequency converter or manual adjustment.

Vitreous enamel reactor with the vast majority of the motor and reducer supporting the use of only in the mixing speed is very high, only to see the motor does not go through the reducer and directly drive the mixing shaft, so the selection of the motor should be generally with the selection of the reducer motor with each other to consider. On many occasions, the motor and reducer are supplied together, and the matching motor can be selected according to the selected reducer at the time of design.

The above points of attention is also need to understand before you buy, so that the choice is also more effective and accurate.