What is a qualified glass lining equipment

The quality of the glass lining layer determines whether this is a good glass lining equipment, and the glass lining layer is crucial. So when choosing equipment, checking the glass lining layer is a crucial step. So what are the requirements for qualified glass lining equipment? Let me take you to understand.

A good glass lined equipment should meet the following conditions:

1. The manhole should be equipped with a high neck flange, which has high high-temperature strength and minimal deformation.

2. All pipe orifices (except for mirror holes) should have flat interfaces for easy piping and maintenance.

3. The pipe orifice and manhole should be connected to the head punching. This docking structure is very beneficial for the quality of the glass lining layer.

4. The manhole cover should be an arched cover, not a flat cover.

5. The glass lining layer on the flange surface of the pipe mouth and the edge of the high neck flange surface should not have flakes or cracks.

6. The outer shape of the upper connecting ring should be relatively regular, and there should be no obvious signs of forced assembly at the joint with the jacket.

7. The lower connecting ring should be a U-shaped lower connecting ring.

8. The jacket inlet should be equipped with a hydraulic nozzle.

9. The structure of the jacket vent hole should comply with the 92 standard.

High quality glass lined equipment must meet these conditions, but this is not entirely included. If you want to get more content, you can leave a message in the comments section, and we will do our best to answer for you.