Repair of Glass lined Reactor

1. Enamel repair welding method

Enamel repair welding is one of the commonly used repair methods. Firstly, the damaged enamel layer should be flattened and dirt and impurities around the enamel layer should be removed. Then, use a dedicated enamel electrode for welding, melt the electrode and apply it to the damaged enamel layer, making it integrate with the original enamel layer. Finally, maintenance and inspection should be carried out on the glass lined reactor to ensure that the quality of the repaired enamel layer meets the requirements.

2. Special coating repair methods

The special coating repair method is suitable for situations where the damage to the enamel layer is relatively small. Firstly, trim the damaged enamel layer flat and remove surrounding dirt and impurities. Then, according to the materials and usage conditions of the repair area, select suitable specialized coatings for application. The special coating has good corrosion resistance and high temperature resistance, which can effectively repair the damaged parts of the enamel layer of the Glass lined Reactor and extend the service life of the reaction kettle.

3. Replace the enamel layer

If the enamel layer is severely damaged or cannot be repaired, it is necessary to consider replacing the enamel layer. Replacing the enamel layer requires professional equipment and technical support, and generally requires returning the reactor to the enamel factory for replacement. Before replacing the enamel layer, it is necessary to thoroughly clean and inspect the reactor to ensure that no other problems occur.

Although there are repair methods for Glass lined Reactor, it is still necessary to pay more attention to equipment maintenance during use to avoid damage to the reaction vessel, as the service life of the repair method is still affected to some extent after damage.