Why the automatic water supply function of glass lined reactor fails?

What are the circumstances that will make the automatic water supply function of glass-lined reactor fail? Once the automatic water supply function of glass-lined reactor fails, it will seriously affect the normal use of the equipment, and also add a lot of trouble and danger to the user. So when the automatic water function of the equipment once failed, should be dealt with in time.

The reason is because the glass lined reactor inside to store a certain amount of air, inside the air is too little, the pump can not disconnect the pressure switch, but also at the same time caused by the pressure tank inside the water pressure, the output pipeline water pressure, no faucet to open no water. Only when the pump works. Equivalent to the water pump to the water supply pipeline to increase pressure, not the pressure tank to the pipeline to increase the pressure, open the water spigot only have water output.

Open the air release valve above the glass-lined reactor. If not, open the pressure gauge or pressure switch, release part of the water. The water nozzle does not release water, put the bottom valve of the sewage water, put part of it, and then electrify the water test.

So when found glass-lined reactor automatic water function can not be normal pneumatic, according to the above content for rapid investigation, so as to first find the problem in time to the failure point, so that the targeted treatment to solve the problem is more effective and appropriate.